32 gaats, met minimaal een enkele bussing, igst verkerend en zeer zeker recht.
geschikt voor canti"s
xc velgen
Moderator:Beheerders
-
Christiaan
- Berichten:6303
- Lid geworden op:wo jul 18, 2001 9:27 pm
Re:xc velgen
Heb nog 2 metal matrix velgen liggen, 32 gaats, zilverkleurig, weinig gebruikt, met oogjes, dubbelwandig. rond en recht, en zeker niet zwaar, noem eens een prijs
Re:xc velgen
welke binnendiameter hebben die velgen? (ook wel ERD genoemd)
-
Christiaan
- Berichten:6303
- Lid geworden op:wo jul 18, 2001 9:27 pm
Re:xc velgen
Hmm, dat zou ik niet durven zeggne, hoe meet je dat?
Re:xc velgen
het merk is Matrix? Dan is ie helaas te groot voor mijn bestaande spaken, aldus de database van dt swiss.
There is one rim dimension: ERD
Effective Rim Diameter (ERD) is the diameter on which you want the ends of the spokes to lie. Most people prefer it near the end of the spoke nipple. If you want to measure your own rim (recommended, just to be sure), then follow these instructions:
Insert two old spokes into holes exactly opposite each other on the rim. Count holes to be sure.
Screw some nipples onto the spokes.
Pull them tight and measure dimension A in the figure (the diameter to the edge of the nipples, where the spokes dissapears into them). Do this at several spots around the rim and average the measurements.
Measure the length of a nipple (dimension B in the figure) and add it twice (once for each nipple). The result is Effective Rim Diameter (ERD). Thus,
ERD = A + 2B.
There is one rim dimension: ERD
Effective Rim Diameter (ERD) is the diameter on which you want the ends of the spokes to lie. Most people prefer it near the end of the spoke nipple. If you want to measure your own rim (recommended, just to be sure), then follow these instructions:
Insert two old spokes into holes exactly opposite each other on the rim. Count holes to be sure.
Screw some nipples onto the spokes.
Pull them tight and measure dimension A in the figure (the diameter to the edge of the nipples, where the spokes dissapears into them). Do this at several spots around the rim and average the measurements.
Measure the length of a nipple (dimension B in the figure) and add it twice (once for each nipple). The result is Effective Rim Diameter (ERD). Thus,
ERD = A + 2B.
Re:xc velgen
Rigida Taurus Disc misschien wel goed?
Re:xc velgen
aangepast aan canti velgen