Zelf net eentje gekocht, maar nog geen tijd om te installeren...maar:
Om de 42T (of een cassete met andere verhouding bv 11-32 ipv 11-36) te installeren moet je de B-tension aanpassen.
Dus ofwel moet je B-tension aanpassen als je wisselt van wielset.
ofwel 2 bestellen
Over short cage:
http://www.oneupcomponents.com/pages/compatibility
What rear derailleurs are compatible with the 42T OneUp Sprocket?
The OneUp 42T sprocket is compatible with most medium or long cage 10 speed mountain rear derailleurs. We are working to populate a complete list of preferred models. As with any cassette you need to check that your rear derailleur has enough capacity.
...
Medium cage deraileurs can typically handle 37T (Shimano) 39T (SRAM) and long cage rear derailleurs can handle 43T (Shimano) 45T (SRAM).
What rear derailleurs are compatible with the 40T OneUp Sprocket?
The OneUp 40T sprocket is compatible with the same rear derailleurs mentioned above. In addition, when used in a 1X system, the OneUp 40T sprocket is compatible with Zee FR and Saint (when set in FR mode) on bikes with 25mm or less suspension chain growth.
Dus voor de 42T helaas geen short cage.
Voor de 40T wel mogelijk onder bepaalde voorwaarden.
Daarom voor mij een Hope 40T-REX + short cage derr, OneUp + med cage derr krijgt vriendin dan
gr Martijn